Getting Started - Cradlepoint MBR1400 Setup Manual

Getting Started

1. Connect the Router to a Modem / Data Source.
Keep the router in the OFF position until the modem is securely connected. Connect a CradlePoint
Business Grade Modem, or a supported USB or ExpressCard modem to the router in their appropriate
port or slot. Connect a Cable or DSL modem to the Blue Ethernet WAN port. (see page 4)
2. Connect the WiFi Antennas.
Attach the three included WiFi antennas to the connectors for maximum WiFi broadcast. Antennas are
jointed, which enables you to position them for optimal WiFi broadcast. To attach, hold the antenna straight
and twist the base of the antenna to connect, folding the joint if needed. Please note that 2.4GHz antennas
are provided. 5GHz antennas are available as an accessory.
3. Connect to a Power Source.
Connect the router to the provided power supply (12V DC Wall). When you flip the power switch to the
ON position, watch for the appropriate modem LED to illuminate. Ensure the connected modem LED is
lit with a solid green light, which indicates that the modem is properly connected. For other LED states,
please see descriptions on page 10.
Getting Started
6 (continued)
4. Connect to a Computer or other Network Equipment.
In order to access the MBR1400, establish a connection to the router. Connect wirelessly to the WiFi
broadcast, or with an Ethernet cable connected to your computer and then plugged into one of the
orange Ethernet ports.
To connect to the WiFi, you will need to input the default password when prompted. The default pass-
word is provided on the product label found on the bottom of your router. (see example below)
7. Use.
For most users, the MBR1400 Router can be used imme-
diately without any special configuration changes. If you'd
like to change your network name, level of WiFi security, etc.
follow the First Time Setup Wizard steps on page 8.
The default WiFi network name broadcast will be seen as
"MBR1400_xxx", where "xxx" is the last three characters of
your router's MAC address, shown as SSID on the product
label.
7
CradlePoint MBR1400 (Slickrock) PRODU
Model No.: MBR1400
Part No.: MBR1400
H/W ver.: 1.0
www.cradlepoint.com
Default Password : 440c1fc1
MAC Address : 0030440c1fc1
Serial No.: MM100167900418
FCC ID:UXX-MBR1400
IC: 6921A-MBR1400
SSID: MBR1400-fc1
RoHS
MFG DATE: NOV 2010
Made in Taiwan 12V 1.5A
R01