Unsent Messages; Sent Messages; Predefined Sms Messages; View Sms Memory - Sonim Xperience One User Manual

Hide thumbs Also See for Xperience One:
Table of Contents

Advertisement

Unsent messages

Messages that have been saved to be sent later or mes-
sages that fail during transmission are stored in Unsent
messages.
1.
To access Unsent messages select
>
SMS
>
Unsent messages
2.
Select
Option
to view the message.
3.
Select
Option
>
Send
now... to send the message.
You can also Forward or Delete an unsent message.

Sent messages

Transmitted messages are stored in Sent messages folder.
1.
To access sent messages select
SMS
>
Sent messages
> OK.
2.
Select
Option
to view the message.
3.
Select
Option
>
Send
now... to resend the message.
You can also Forward or Delete a Sent message.

Predefined SMS messages

You can customize and store up to a maximum of 10 SMS
messages in the SIM card memory. On the other hand the
phone book memory can store a larger number of pre-
defined SMS messages.
1.
Select
Menu
>
Messages
SMS
> OK.
2.
Enter a message and select Save.
Menu
>
Messages
> OK.
Menu
>
Messages
>
>
SMS
>
User define

View SMS memory

1.
To view the memory capacity for SMS messages select
Menu
>
Messages
>
SMS

Broadcast SMS

You can receive a variety of text messages, such as news
and traffic information, broadcast by your network. These
messages are provided to all users in a certain cell. If you
have subscribed to this service, your network will provide
you the available channel numbers.
Receive SMS broadcasts
You can choose to enable or disable Cell Broadcast (CB) ser-
vice.
1.
To receive broadcast messages select
ges
>
SMS
> scroll to
Broadcast SMS
tion
>
On
> OK.
New cell broadcast messages are directly shown on
your standby display, until you press a key. Broadcast
SMS messages cannot be stored in your phone or SIM
card, and thus cannot be viewed once deleted.
Note: If the Broadcast SMS option is enabled, the
standby time in your phone will be reduced.
Channel lists
You can add a new topic or channel number, which is a new
broadcast type, into your Topic list. A topic code number
can consist of 3 digits only.
46
>
Capacity
> OK.
Menu
>
Mess-
>
Recep-

Advertisement

Table of Contents
loading

This manual is also suitable for:

Xp1

Table of Contents