Installing The Pci-X/Pci Express I/O Expansion Board - HP ProLiant DL580 G7 User Manual

Install the PCI Express I/O expansion board.
7.
Install any expansion boards
8.
Install the access panel.
9.
Slide the processor memory drawer back into the server.
10.
Slide the server back into the rack.
11.
Power up the server (on page 25).
12.

Installing the PCI-X/PCI Express I/O expansion board

CAUTION:
all expansion slots have either an expansion slot cover or an expansion board installed.
IMPORTANT:
configuration, the second processor must be installed in socket 3.
Power down the server (on page 25).
1.
Extend the server from the rack (on page 25).
2.
Remove the processor memory drawer shipping screws, if installed. Retain the screws for future use
3.
("Processor memory drawer shipping screw
("Installing a non-hot-plug expansion
To prevent improper cooling and thermal damage, do not operate the server unless
When either optional I/O expansion board in installed in a two-processor
board" on page 57).
locations" on page 27).
Hardware options installation 62