Table of Contents
Advertisement
LISTED SOLID FUEL BURNING ROOM
HEATER - MODEL: "DVC 500"
W/N 03625
TESTED TO: ASTM E1509, and parts of UL127
TEST DATE: July, 1996
APPROVED FOR USE IN MANUFACTURED HOMES.
pREVENT HOUSE FIRES: kEEP DOORS AND HOPPER LID CLOSED DURINg OPERATION.
INSTALL AND USE ONLy IN ACCORDANCE wITH MANUFACTURER'S INSTALLATION AND OPERATINg
INSTRUCTIONS. CONTACT LOCAL bUILDINg OR FIRE OFFICIALS AbOUT RESTRICTIONS &
INSTALLATION INSPECTION REqUIREMENTS IN yOUR AREA. SEE THE INSTALLATION MANUAL
AND CHECk wITH yOUR LOCAL CODES FOR SPECIAL INSTRUCTIONS wHEN PASSINg THE VENT
THROUgH A COMbUSTIbLE wALL OR CEILINg.
UNIT MUST bE PLACED ON A NON-COMbUSTIbLE FLOOR OR FLOOR PROTECTOR ExTENDINg 16"
TO THE FRONT, 8" TO THE SIDES AND 3" TO THE REAR. MINIMUM 24 gA SHEET METAL.
DIRECT-VENT - USE ONLy HARMAN DVC-VENTINg COMPONENTS FROM THE APPLIANCE
THROUgH THE OUTSIDE wALL. USE ONLy 4" TyPE L OR PL PELLET
VENT ON THE OUTSIDE OF HOME.
DO NOT CONNECT TO A CHIMNEy. DO NOT CONNECT THIS UNIT
TO A CHIMNEy OR FLUE SERVING ANOTHER AppLIANCE.
FUEL: ANTHRACITE RICE COAL ONLy. THE EPA PROHIbITS THE
USE OF ANy OTHER FUEL, ExCEPT FOR COAL IgNITION.
INpUT RATING: 6 POUNDS PER HOUR.
ELECTRICAL RATING: 2.5 AMPS, 120 VOLTS, 60 HERTz.
REPLACE gLASS wITH ONLy 5 MM CERAMIC.
INSpECT AND CLEAN ExHAUST VENTING SySTEM
FREqUENTLy.
MINIMUM CLEARANCES TO
COMBUSTIBLES:
UNIT TO SIDE WALL -
18"
UNIT TO REAR WALL -
3"
STOVE TOp TO CEILING - 24"
CORNER INSTALLATION - 9"
FLOOR pROTECTION:
FRONT -
16"
SIDES -
8"
REAR -
3"
Date of Manufacture:
2010 2011 2012 JAN FEB MAR APR MAY JUN JUL AUG SEP OCT NOV DEC
Manufactured by: Harman Home Heating 352 Mountain House Road, Halifax PA 17032
5.5" x 7.5" adhesive backed metal label.
Serial Number:
WHI-
DO NOT REMOVE THIS LABEL.
18"
46"
8"
8"
16"
42"
This appliance is also approved
for installation into a shop.
4"
Pellet
Vent
Harman Venting
Components Only.
9"
9"
# 3-90-08210
2
Advertisement
Table of Contents
