LMX21981xx
PILOT VALVE ASSEMBLY
LMX21981xx
Turn off the water.
Remove the water line from the
valve by removing the release guard
clip and pressing the collet (release
ring.)
Separate the mechanical cover and
remove the screw that holds the
valve assembly to the refrigerator.
Separate the housing.
Pull out the valve.
Lay a dry towel on the floor and be
ready to spill water from the filter
line. Remove the release guard clip
and press the collet to separate the
tube from the connector. Allow the
water to drain from the line until it is
empty.
Page 40
REFRIGERATOR
TRAINING MANUAL