Replacing The Water Filter - LG LMX21981 Series Training Manual

Four door
Hide thumbs Also See for LMX21981 Series:
Table of Contents

Advertisement

LMX21981xx

REPLACING THE WATER FILTER

Replace the filter when the water filter indicator decrements to 0 or the water dispenser
or icemaker noticeably decrease production.
When the water filter indicator displays the message 0 Filter Month, Hold 3 Seconds,
reset the water filter status display and indicator light by pressing and holding the
LIGHT/FILTER button for more than 3 seconds.
LMX21981xx
Rotate the knob of the old cartridge
counterclockwise. When the cartridge is
released, you will feel it click out of place.
NOTE: Replacing the filter causes a small
amount of water (around 1 oz. or 25 cc)
to drain. Place a cup under the filter hole
to contain it.
Remove the old cartridge. Take the new
cartridge out of its packaging, and remove
the protective cover from the o-rings. Hold
the cartridge handle in its vertical position,
and firmly push the new filter cartridge into
place until it stops.
Use the handle to twist the cartridge
clockwise about one turn, until the handle
is in a horizontal position. You will feel the
filter click into place.
NOTE: If the filter will not turn from side to
side, it isn't fully inserted.
After replacing the filter, dispense for 2
minutes from the water dispenser to purge
the water system. Check the filter for leaks.
Page 20
REFRIGERATOR
TRAINING MANUAL

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents