Adjusting The Temperatures And Displays - LG LMX21981 Series Training Manual

LMX21981xx
ADJUSTING THE TEMPERATURE AND DISPLAYS
NOTE: The actual inner temperature varies depending on the food status, since the
indicated temperature setting is the target temperature and not the actual temperature
within the refrigerator. Initially set the REFRIGERATOR CONTROL at 37 degrees F and
the FREEZER CONTROL at 0 degrees F. Leave them at these setting for 24 hours (one
day) to stabilize. Then adjust the compartment temperature as illustrated above.
LMX21981xx
Adjust Freezer Temperature
To adjust the temperature in the freezer
compartment, press the FREEZER button
to cycle through the range of available
settings.
Adjust Refrigerator Temperature
To adjust the temperature in the
refrigerator compartment, press the
REFRIGERATOR button to cycle through
the range of available settings.
To change the temperature display from
Fahrenheit to Celsius or vice versa,
simultaneously press and hold the
FREEZER and REFRIGERATOR buttons for
more than 5 seconds.
Display Power-Saving Mode
This function places the display into the
Power-Saving Mode.
Simultaneously press the FREEZER and ICE
PLUS buttons and hold them for 5 seconds
until a tone sounds. All LED lights will turn
on and then off. When the Power-Saving
Mode is activated, the display will remain
off until the next time the door is opened.
The display will also turn on when any
button is pressed, and it will remain on for
20 seconds after the last door opening or
button selection.
To deactivate the Power-Saving Mode,
press the FREEZER and ICE PLUS buttons
simultaneously and hold them for 5
seconds until the tone sounds.
Page 16
REFRIGERATOR
TRAINING MANUAL