Making Copies; How To Copy; Stop Copying - Brother MFC-J6510DW User Manual

8

Making copies

How to copy

The following steps show the basic copy
operation. For details about each option, see
the Advanced User's Guide.
a
Make sure you are in copy mode, press
(COPY) to illuminate it in blue.
 The LCD shows:
1 No. of Copies
Press the number box directly and enter
the number you want.
Also you can enter the number of copies
by pressing
screen (as shown above).
Note
The default setting is Fax mode. You can
change the amount of time that the
machine stays in Copy mode after the last
copy operation. (See Mode Timer in
chapter 1 of the Advanced User's Guide.)
8
1
or on the
b
Do one of the following to load your
document:
Place the document face up in the

ADF.
(See Using the ADF on page 28.)
Place the document face down on

the scanner glass.
(See Using the scanner glass
on page 29.)
c
If you want more than one copy, enter
the number (up to 99).
d
Press Mono Start or Colour Start.

Stop copying

To stop copying, press Stop/Exit.
8
8
8
55