Error Animations Display; Transferring Your Faxes Or Fax Journal Report - Brother MFC-J6510DW User Manual

Error animations display

Error animations display step-by-step
instructions when paper gets jammed. You
can read the steps at your own pace by
pressing c to see the next step and d to go
backward.
Transferring your faxes or Fax
Journal report
If the LCD shows:

Unable to Clean XX

Unable to Init. XX

Unable to Print XX

Unable to Scan XX
We recommend transferring your faxes to
another fax machine or to your PC. (See
Transferring faxes to another fax machine
on page 79 or Transferring faxes to your PC
on page 79.)
You can also transfer the Fax Journal report
to see if there are any faxes you need to
transfer. (See Transferring the Fax Journal
report to another fax machine on page 80.)
Transferring faxes to another fax
machine
If you have not set up your Station ID, you
cannot enter fax transfer mode. (See Enter
personal information (Station ID) in the Quick
Setup Guide.)
a
Press Stop/Exit to interrupt the error
temporarily.
b
Press MENU.
c
Press a or b to display Service.
d
Press Service.
e
Press Data Transfer.
f
Press Fax Transfer.
g
Do one of the following:
B
 If the LCD shows No Data, there
are no faxes left in the machine's
memory.
Press Stop/Exit.
 Enter the fax number to which faxes
will be forwarded.
h
Press Mono Start.
B
Transferring faxes to your PC
You can transfer the faxes from your
machine's memory to your PC.
a
Press Stop/Exit to interrupt the error
temporarily.
b
Make sure you have installed
MFL-Pro Suite on your PC, and then
turn on PC-FAX Receiving on the PC.
(For details see PC-FAX receiving in the
Software User's Guide.)
c
Make sure you have set PC-Fax
Receive on the machine. (See PC-Fax
Receive (Windows
the Advanced User's Guide.)
If faxes are in the machine's memory
when you set up PC-Fax Receive, the
LCD will ask if you want to transfer the
faxes to your PC.
B
d
Do one of the following:
 To transfer all faxes to your PC,
press Yes. You will be asked if you
want a backup print.
 To exit and leave the faxes in the
memory, press No.
e
Press Stop/Exit.
Troubleshooting
B
®
only) in chapter 4 of
79
B