Concluding Steps - Fujitsu Primergy BX920 S4 Upgrade And Maintenance Manual

Figure 103: Routing the holding rope
Ê Route the holding rope (see oval) of the onboard SAS enabling key into the
gap between its own socket and the connector of the mezzanine bracket on
the system board as shown in the figure.

10.4.5 Concluding steps

Perform the following procedures:
"Closing the server blade" on page 57
Ê
"Installing the server blade in the system unit" on page 58
Ê
"Switching on the server blade" on page 60
Ê
"Closing the rack door" on page 62
Ê
BX920 S4
Upgrade and Maintenance Manual
System board components
241