System Settings - D-Link GO-RT-N150 User Manual

Section 3 - Configuration
Save Settings to
Use this option to save the current router configuration
Local Hard Drive:
settings to a file on the hard disk of the computer you
are using. First, click the Save button. You will then
see a file dialog, where you can select a location and
file name for the settings.
Load Settings
Use this option to load previously saved router
from Local Hard configuration settings. First, use the Browse control
Drive:
to find a previously save file of configuration settings.
Then, click the Load button to transfer those settings
to the router.
Restore to Factory
This option will restore all configuration settings back
Default Settings:
to the settings that were in effect at the time the router
was shipped from the factory. Any settings that have
not been saved will be lost, including any rules that you
have created. If you want to save the current router
configuration settings, use the Save button above.
Reboot Device:
Click to reboot the router.
Clear Language
This is to restore the device back to English version only.
Pack:
Remove other languages installed for the system web
pages.
D-Link GO-RT-N150 User Manual

System Settings

37