Jam Error Codes - Panasonic DP-3010 Service Handbook

Code
J00 The Registration Sensor does not detect paper within a predetermined time after the
paper starts feeding. (Sheet Bypass)
J01 The Registration Sensor does not detect paper within a predetermined time after the
Paper Feed Roller starts rotating. (1st Feeder Unit)
J02 The 2nd Registration Sensor does not detect paper within a predetermined time after
the Paper Feed Roller starts rotating. (2nd Feeder Unit)
J03 The 3rd Registration Sensor does not detect paper within a predetermined time after
the Paper Feed Roller starts rotating. (3rd Feeder Unit)
J04 The 4th Registration Sensor does not detect paper within a predetermined time after
the Paper Feed Roller starts rotating. (4th Feeder Unit)
J07 The Registration Sensor does not detect paper within a predetermined time after the
paper starts feeding from 2nd Feeder Unit. (2/3/4 Feeder Unit)
J08 The Registration Sensor did not detect paper within a predetermined time after the
Paper Feed Roller started rotating on the 3rd Feeder Unit. (3/4 Feeder Unit)
J09 The Registration Sensor did not detect paper within a predetermined time after the
Paper Feed Roller started rotating on the 4th Feeder Unit. (4th Feeder Unit)
J12 The 2nd Registration Sensor does not go off within a predetermined time after the
Paper Path Sensor is activated.
J13 The 3rd Registration Sensor does not go off within a predetermined time after the
Paper Path Sensor is activated.
J14 The 4th Registration Sensor does not go off within a predetermined time after the
Paper Path Sensor is activated.
J19 The Registration Sensor does not detect within a predetermined time after the
Automatic Duplex Unit Sensor 4 is activated.
J22 The 2nd Registration Sensor detect paper at the time of the initials.
J23 The 3rd Registration Sensor detect paper at the time of the initials.
J24 The 4th Registration Sensor detect paper at the time of the initials.
J30 The Registration Sensor does not go off within a predetermined time after the Sensor
is activated. (Sheet Bypass)
J31 The Registration Sensor does not go off within a predetermined time after the Sensor
is activated. (Except Sheet Bypass)
J32 The Registration Sensor does not go off within a predetermined time after the Sensor
is activated. (i-ADF)
J33 The Registration Sensor detects paper during non-printing mode.
J40 The Fuser Unit Paper Exit Sensor does not detect paper within a predetermined time
after the Registration Sensor is activated.
J41 The Fuser Unit Paper Exit Sensor does not go off within a predetermined time after
the Sensor is activated.
J42 The Fuser Unit Paper Exit Sensor detects paper during non-printing mode.
J43 The Exit Sensor does not detect paper within a predetermined time after the Fuser
Unit Paper Exit Sensor is activated.
J44 The Paper Exit Sensor keeps detecting paper after a predetermined time.
J45 The Paper Exit Sensor keeps detecting paper after a predetermined time, during non-
printing mode.
J46 The Dual-Path Exit Sensor does not go off within a predetermined time after the
Sensor is activated.
J47 The Dual-Path Exit Sensor keeps detecting paper after a predetermined time, during
non-printing mode.
Ver. 2.0
Jam Error Codes (J Code) Table
Contents
59
DP-2310/3010
DP-2330/3030
Section
C
C
D2
D3
D4
C, D2
D3
D4
C, D2
D3
D4
C
C, D2
D2, D3
D3, D4
C
C
C
C
C
C
C
C
C
C
C
C
DEC 2004