Figure 3-4 In-Ceiling Housing Bubble Installation - Honeywell EQUIP Series Installation And Configuration Manual

Attaching the Bubble to an In-Ceiling Housing
Document 800-04194V1 Rev A
07/11
®
EQUIP Series ACUIX™ IP PTZ Dome Installation and Configuration Guide
To attach the bubble to the housing:
1. Attach the safety cable from the bubble to the bracket inside the housing.
2. Align the three hooks on the bubble with the three mounting posts on the
housing.
3. Turn the bubble clockwise to lock it into the housing.
Figure 3-4 In-Ceiling Housing Bubble Installation
21