Related Documents - Honeywell EQUIP Series Installation And Configuration Manual

Related Documents

ACUIX Terminology
xvi
Document Title
®
EQUIP Series ACUIX™ IP PTZ Dome Quick Installation Guide
ACUIX™ IP Series Rugged Housing and Dome Installation Guide
ACUIX™ Analog High-Speed PTZ Dome User Guide
HDXWM2 Wall Mount Installation Guide
HDPRM2 Parapet Mount Installation Guide
HDCM1 Ceiling Mount Installation Guide
This document uses the following terms to describe the main hardware
components of the ACUIX PTZ dome:
Dome The complete installed product including the housing, mount or adapter,
scan assembly, and bubble.
Housing The in-ceiling, pendant, or rugged outer enclosure that houses the scan
assembly. It contains an interface board for connecting power, video,
control data, and alarm wiring to the dome. The housing is a component
of the dome.
Mount The hardware used to support the housing. It may be included with the
housing (as with in-ceiling and rugged housings) or available for
purchase separately (as with indoor or outdoor pendant housings). The
mount is a component of the dome.
Scan Assembly A combination of mechanical, electrical, and software components,
including the camera block and firmware. It is installed inside the housing
and enclosed by the bubble. The scan assembly is a component of the
dome.
Camera The particular model of camera purchased. The camera is a component
of the scan assembly.
Bubble The optically transparent hemisphere that fits onto the bottom of the
housing, enclosing the scan assembly. It is available in clear or colored
versions. The bubble is a component of the dome.
Part Number
800-01115
800-02460
800-05662V1
800-04516
900.0877
900.0869