Usb Charger - Asus Gryphon Z97 Manual

4.4.7

USB Charger+

USB Charger+ allows you to quick-charge your portable USB devices even if your computer
is off, in sleep mode or hibernate mode.
Before using USB Charger+, ensure to disable the ErP Ready item from the Advanced >
APM > ErP Ready in the Advanced mode of the BIOS Setup program.
Launching USB Charger+
To launch USB Charger+, click or tap
menu, then select USB Charger+.
USB Charger+ screen
Click or tap to detect the
connected USB device
Indicates that the
connected USB device is
in charging mode
Ensure to connect your USB device into the USB port that supports this utility. Refer to
section 2.3.1 Rear I/O connection of your user guide for more details.
•
•
ASUS GRYPHON Z97
Click or tap to select the type of USB device
that you wish to charge when the system is off
The USB Charger+ does not support USB hubs and USB extension cables, and
generic USB cables.
The USB Charger+ may not recognize some ASUS devices due to a special design.
on the top-right corner of the AI Suite 3 main
Click or tap to fast-
charge your USB
device
Click or tap to stop
charging your USB
device
Click or tap to
apply the settings
Click or tap to
discard the settings
4-21