Electricity Supply / Safety Information; Electrical Supply - Hotpoint DWF30 User And Installation Instructions Manual

FP105-01 DWF35/34/33/30 12/02/2002 10:22 am Page 3

Electrical Supply...

WARNING: This appliance must be earthed.
Fuses
Your appliance comes fitted with a plug and a 13A fuse.
If you need to replace the fuse, only those rated at 13A and ASTA
approved to BS1362 should be used.
WARNING: Do not use the plug unless the fuse cover is fitted.
Changing the plug
Cut off and dispose of the supplied plug if it does not fit your socket.
WARNING: To avoid a shock hazard do not insert the discarded plug into a socket anywhere
else.
IMPORTANT: WIRES IN THE MAINS LEAD ARE COLOURED IN ACCORDANCE WITH THE
FOLLOWING CODE:
Green / Yellow
Blue
Brown
If you change the plug, the colour of
the wires in the mains lead may not
correspond with the colour of the
markings identifying terminals in the
plug. You should therefore wire it as
shown.
Changing the Mains Lead
A special lead can be ordered from your Service Department:
UK: 08709 066 066 or
Republic of Ireland: 1850 302 200
If you have damaged the existing lead or require a longer one a charge will be made. It is
strongly advised that this work is carried out by a qualified electrician.
Green and yellow (Earth) wire to
- Earth
terminal marked 'E' , symbol
- Neutral
or coloured green and yellow.
- Live
Blue (Neutral) wire to terminal
marked 'N' or coloured black.
,
13A ASTA approved fuse
to BS1362.
Brown (Live) wire to
terminal marked 'L' or
Cord
coloured red.
clamp
3