Carbon Ribbon - SATO CT400 Product Manual

■

Carbon Ribbon

CT4xxiTT could use ribbons of up to 110 mm width.
Carbon ribbons with a width greater than 92 mm could be loaded directly into the ribbon
unit. For ribbons < 92 mm a ribbon adapter has to be used; 2 adapters (unwind/rewind)
come with each printer.
Ribbon adapter
■
Printer Throughput and Performance
A hallmark of SATO printers has always been the speed with which label data is processed,
resulting in the industry's fastest time to "fi rst label out". SATO's leadership position in this
important area is retained with the introduction of the CT4i series printers.
■
Multiple Print Resolution Availability
The CT4i series printer is available in 203 dpi, 305 dpi and 600 dpi resolution – each at a full
104 mm print width. Each of these print resolutions is available within the same CT4i base
model. End users with multiple resolution requirements within the same location now have a
common SATO printer platform. This is more effi cient for end users due to the commonality of
spare parts, training, service procedures and preventive maintenance. Essentially, this result in
one printer model confi gured to the needs of each individual production line or product.
■
High Resolution Printing
– Ideal for printing small 2D barcodes or patient's photo on wristbands.
– The CT424i is currently the only 600 dpi 4" desktop printer in the market.
High resolution printing
1 3
For 76 mm or 59 mm
For 76 mm or 59 mm
For 45 mm
For 45 mm