Disclaimers And Confidentiality - SATO CT400 Product Manual

DISCLAIMERS AND CONFIDENTIALITY

CT408i, CT412i and CT424i are trademarks of SATO Corporation. Other product and corporate names used in this publication
may be trademarks or registered trademarks of other companies, and are used only for explanation and to their owner's
benefi t, without intent to infringe.
SATO has made a good faith effort to present the most accurate and timely information available. Competitive information
contained in this publication is based on public data sources available at the time of publication. SATO shall not be responsible
for any inaccuracies or omissions in this information, including, but not limited to, information obtained from other companies'
publications, the press, and other third party organizations.
All information in this publication is subject to change without notice, and does not represent a commitment on the part of
SATO. No part of this document may be reproduced for any purpose or in any form, including electronic storage and retrieval,
without the express permission of SATO. This document should be considered confi dential and not distributed to any third
parties. This document is intended solely for the use of SATO agents and representatives.
The acronyms used to identify the programming languages of non-SATO products may be the property of their respective
companies and are used here to identify their various programming languages, used only for explanation without intent to
infringe. SATO makes no claims to the authenticity of their command language or functionality.
Copyright 2007, SATO Corporation. All rights reserved.
4