Glass Frame Removal; Final Installation; Brick Installation - Majestic 300DVBHN/PV7 Manual

GlASS ReMoVAl

GlASS FRAMe ReMoVAl

1. Release two clamps on bottom of fireplace. Figure 59
. Tilt glass frame out and lift glass frame up until it clears three tabs on top of
fireplace.
3. Set glass frame aside.
Figure 59 -
Remove Glass Frame
each clamp has a quick spring force. When
reinstalling clamps, keep fingers clear.

BRICK INStAllAtIoN

1. Remove glass door frame and log set.
. Remove the glass heat shield, baffle and rear bracket.
3. Install the center firebrick panel on the back wall first. Stand firebrick panel straight up against
the back of fireplace with the bottom edge at bottom of inner firebox.
4. Repeat Step 3 with the left and right side firebrick panels. Secure the top of each side firebrick
panel to the fireplace with one retainer bracket and one screw.
5. Use a screw gun to drive in the self-drilling screw into the sheet metal through the hole in the
retainer bracket.
6. Re-install glass heat shield, baffle and rear bracket.
7. Re-install glass door frame and log set.
54D8001
Glass Frame
DVBH7 Series Direct Vent Gas Fireplace
Clamps
FP2588
remove glass frame
FP588
WARNING
!
HOT GLASS WILL
CAUSE BURNS.
DO NOT TOUCH GLASS
UNTIL COOLED.
NEVER ALLOW CHILDREN
TO TOUCH GLASS.
41