Rear Panel Layout - Samson Resolv 50a Owner's Manual

Rear Panel Layout

1 VOLUME - Controls the amount of output
level.
2 RCA – Used to connect signals from unbal-
anced, –10dBV devices.
3 1/4-INCH PHONE – Balanced TRS (Tip, Ring,
Sleeve) 1/4-inch phone plug used to connect
balanced or unbalanced line level signals.
1
dBr
5
0
-9
-15
0 10
-21
VOLUME
-27
10 100 1K
CROSSOVER
dBr
50
30
0
-15
-30
-50
10 100 1K
FREQUENCY RESPONSE
ACTIVE MONITOR SPECS:
• 70Hz – 20kHz
• BIAMPED 50 WATT WOOFER
COPOLYMER CONE
• 20 WATT TITANIUM FERRO FLUID
TWEETER
• TIME ALIGNED WAVEGUIDE
• MAGNETICALLY SHIELDED
WARNING:
RESOLV MONITORS CAN ACHIEVE
EXTREMELY HIGH SOUND
PRESSURE LEVELS. USE CAUTION
OR HEARING DAMAGE MAY RESULT
S/N
POWER
115-230 vac ó 50Hz/60Hz 175W
RATING
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
www.samsontech.com
DESIGNED AND ENGINEERED IN THE UNITED STATES BY SAMSON TECHNOLOGIES
5
RESOLV 50a Layout
-10 INPUT
3
+4 INPUT
10K 30K
FREQUENCY (Hz)
10K 30K
FREQUENCY (Hz)
POWER
ON
OFF
MADE IN CHINA
4 POWER SWITCH – Main power switch
(when set to the ON position) illuminates
green indicating the RESOLV 50a is powered
up and ready for operation.
5 AC INLET - Connect the supplied IEC power
cable here.
2
4
5