Arctic King WINDOW/WALL TYPE ROOM AIR CONDITIONER User Manual page 16

Fig.9
Fig.12
Fig.13
Sash
,,
Storm window
11/2 MIN
frame or other
(38 mm)
obstruction
5
holes into window sash (Fig.9/10).
6
sash lock with 3 / 4 (19mm) screw as shown(Fig.11).
Fig.10
7
upper and lower sashes (Fig.12).
If AC is Blocked by Stor m Window
Add wood as shown in Fig.13, or remove storm
window before air conditioner is installed.
If Storm Window Frame must remain, be sure the
drain holes or slots are not caulked or painted shut.
Accumulated Rain Water or Condensation must be
Board
allowed to drain out.
thickness
as required,
for proper
Removing AC From Window
pitch to rear,
along entire
sill. Fasten
with nails or
screws.
,,
Drive 3 / 4 (19mm) locking screws through frame
To secure lower sash in place, attach right angle
,,
Fig.11
Cut foam seal and insert in the space between the
Turn AC off, and disconnect power cord.
Remove sash seal from between windows, and
unscrew safety lock.
Remove screws installed through frame and frame
lock.
Close (slide) side panels into frame.
Keeping a firm grip on air conditioner, raise sash
, ,
and carefully rock air conditioner backward to
drain any condensate water in base of unit. Be
carefully not to spill any remaining water while
lifting unit form window. Store parts WITH air
conditioner.
13
Meijer.com