Installation Instructions - Arctic King WINDOW/WALL TYPE ROOM AIR CONDITIONER User Manual

INSTALLATION INSTRUCTIONS

Your air conditioner is designed to install in standard double hung windows with opening widths of
23 to 36 inches(584mm to 914mm) (See Fig.1).
EX ERIOR T
OFFSET
WALL
STOOL
14 1 2 min.
SILL
(368 mm)
INTERIOR
WALL
Mounting Hardware
3 4 Screws
Lock Frame
(7)
(2)
Top Rail Hardware
3 8 Screws
Top Rail
(4)
Lower sash must open sufficiently to allow a clear vertical
opening of 14-1/2 inches (368mm). Side louvers and the rear
of the AC must have clear air space to allow enough airflow
23 to 36
584mm to 914mm
through the condenser, for heat removal. The rear of the unit
/
must be outdoors, not inside a building or garage.
NOTE:
for future reference. The carton is the best way to store unit
Fig.1
during winter, or when not in use.
TOOLS NEEDED:
Phillips Screw Driver
Drill(If pilot holes are needed)
CAUTION:
sharp metal edges and aluminum fins on front and rear coils.
Sash Lock
(1)
NOTE:
Fig.B and Fig.C are not applicable to the units
than 10000Btu/h.
Before installing unit, the top rail must be assembled
(1)
on the unit (For <10000Btu/h models only).
Tool Needed: Phillips Screwdriver
A: Remove the air conditioner from the carton and place
on a flat surface.
B: Remove top rail from the bottom of the packaging
material as shown in Fig.A
Save Carton and these
When handling unit, be careful to avoid cuts from
The top rail hardware and the following Fig.A,
10
Meijer.com
Installation Instructions
more