Attaching The Belt Clip - Radio Shack TRC-510 Owner's Manual

21-410.fm Page 6 Thursday, August 5, 1999 3:36 PM
4. Replace the cover.
Replace the battery when your transceiver sounds
weak or other transceivers do not receive your trans-
missions when they are set to the same frequency you
are using.

ATTACHING THE BELT CLIP

To install the clip, simply slide it up into the slot on the
back of the transceiver until it locks into place.
(illus)
To remove the clip, lift up on the locking tab and slide
the clip down.
(illus)
6