Advertisement
Q-SEE IP CAMERA MODEL QSTC201/211 QUICK INSTALLATION GUIDE
.
f. Once you are logged in, click on the [Setup] tab at the right hand side of your screen (See Figure 8). This
will generate a drop down menu on the left hand side of your Setup screen (See Figure 11). Choose the
"DDNS Config" option from the menu and you will generate a DDNS Config dialog on the right of your
screen (Figure 16).
g. Check the "Enable DDNS box at the top of your dialog box (Figure 16) and choose
from the drop down list.
h. Enter the User Name, Password and Domain Name that you registered for at myq-see.com.
i. Click on the [Save] button at the bottom of your screen (Figure 16).
j. Once you have completed the registration process and configured you DDNS settings, you can log in to
your Q-See IP Camera from anywhere by entering your domain address in the address bar of your IE
Browser.
With New Firmware v 1.3.0 Build 20091022
g.
(Figure 16)
10 | P a g e
h.
i.
www.myq-see.com
Advertisement
