NordicTrack T5ZI User Manual page 7

1. Make sure that the power cord is unplugged.
With the help of a second person, carefully tip
the treadmill onto its left side. Partially fold the
Frame (55) so that the treadmill is more stable;
do not fully fold the Frame yet.
Remove and discard the two indicated bolts (A)
and the shipping bracket (B).
Cut the shipping tie securing the Upright Wire
(87) to the Base (95). Locate a plastic tie in the
indicated hole in the Base, and use the tie to pull
the Upright Wire out of the hole.
Attach two Base Feet (90) and two Base Foot
Spacers (94) to the Base (95) in the locations
shown with two #8 x 1" Tek Screws (5).
Then, attach the other two Base Feet (90) with
two #8 x 1" Tek Screws (5).
2. Attach a Wheel (96) to the Base (95) with a 3/8"
x 2" Bolt (8) and a 3/8" Nut (10). Do not over-
tighten the Nut; the Wheel must turn freely.
Press a Base Cap (89) into the Base (95).
1
94
55 90
94
2
8
96
10
7
B
Hole
87
5
90
5
89
95
A
90
5
95
90
5