Summary of Contents for NordicTrack T5.5 NTL60011.0
Page 1
® www.nordictrack.corn Model No. NTL60011.0 Serial No. ;ER'S A UAL Write the serial number in the space above for reference. Serial Decal QUESTIONS? if you have questions, or if parts are damaged or missing, DO NOT CONTACT THE STORE; please contact Customer Care.
Page 2
FROMTHISAREAWHILETHE away from cloying belt, ..• Never t_?¢to adjust TREADMILLIS IN OPERATION. or fix the belt while _s moving. athletic shoes wNle _][_ .Always wear operating treadmill. NORDICTRACK is a registered trademark of ICON IP, Inc.
Page 3
14. To purchase a surge suppressor, informed of all warnings and precautions. see your local NORDICTRACK dealer or call the telephone number on the front cover of Use the treadmill only as described.
Page 4
20. Never leave the treadmill unattended while DAN G ER:Always unplug the power it is running. Always remove the key, unplug cord immediately after use, before clean= the power cord, and press the power switch ing the treadmill, and before performing the into the off position when the treadmill is not maintenance...
Page 5
BEFORE YOU BEGIN Thank you for selecting the new NORDICTRACK <°_' T5.5 manual. To help us assist you, note the product model treadmill. The T5.5 treadmill provides an impressive number and serial number before contacting us. The model number and the location of the serial number selection of features designed to make your workouts decal are shown on the front cover of this manual.
Page 14
OPERATION AND ADJUSTMENT HOW TO PLUG iN THE POWER CORD This product is for use on a nominal 120-volt circuit (see drawing 1). A temporary adapter may be used to connect the surge suppressor to a 2-pole receptacle if a properly-grounded outlet is not available (see drawing 2).
Page 15
CONSOLE DIAGRAM FEATURES OFTHECONSOLE You can even listen to your favorite workout music or audio books with the console's premium stereo sound The treadmill console offers an impressive array of system while you get in shape. features designed to make your workouts more effec- tive and enjoyable.
Page 16
HOW TO TURN ON THE POWER HOW TO USE THE MANUAL MODE iMPORTANT: if the treadmill has been exposed to insert the key into the console. cold temperatures, allow it to warm to room tern= See HOW TO TURN ON THE POWER at the left. perature before turning on the power, if you do not do this, you may damage the console displays or Select the manual mode.
Page 17
Change the incline of the treadmill as desired. The Speed tab will show a profile of the speed set- tings of the workout. To change the incline of the treadmill, press the Incline increase or decrease button or one of the The My Trail tab will show a track that represents numbered Quick Incline buttons.
Page 18
Measure your heart rate if desired. When you are finished using the treadmill, press the power switch into the off position and unplug Before using the the power cord. IMPORTANT: If you do not do heart rate moni- this, the treadmill's electrical components tor, remove the wear prematurely.
Page 19
HOW TO USE AN ONBOARD WORKOUT The workout will continue in this way until the last segment of the profile flashes in the display and the insert the key into the console. last segment ends. The walking belt will then slow to a stop.
Page 20
HOW TO USE AN IFIT LiVE WORKOUT calories you will burn. The display may also show the name of the workout. If you select a competition Note: To use an iFit Live workout, you must have an workout, the display will count down to the begin- optional iFit Live module.
Page 21
THE iNFORMATiON MODE 3. CONTRAST LVL: Press the Incline increase and decrease buttons to adjust the contrast level of the The console features an information mode that keeps display. track of treadmill information and allows you to person- alize console settings. if a module is connected, you may also select the following...
Page 22
HOW TO FOLD AND MOVE THE TREADMILL HOW TO FOLD THE TREADMILL HOW TO MOVE THE TREADMILL To avoid damaging the treadmill, adjust the incline Before moving the treadmill, fold it as described at the left. CAUTION: Make sure that the latch knob is to the lowest position before you fold the treadmill.
Page 23
TROUBLESHOOTING Most treadmill problems can be solved by following Remove the key from the console, and then reinsert it. the simple steps below. Find the symptom that applies, and follow the steps listed, if further assis- tance is needed, see the front cover of this manual. If the treadmill still will not run, please see the front cover of this manual.
Page 24
Locate the Reed Switch (95) and the Magnet (44) If the walking belt is overtightened, treadmill per- on the left side of the Pulley (43). Turn the Pulley formance may decrease and the walking belt may until the Magnet is aligned with the Reed Switch. become damaged.
Page 25
SYMPTOM: The walking belt is off=center or slips if the walking belt slips when walked on, first re- when walked on move the key and UNPLUG THE POWER CORD. Using the hex key, turn both idler roller screws if the walking belt is off-center, first remove the clockwise, 1/4 of a turn.
Page 26
EXERCISE GUiDELiNES Burning Fat--To burn fat effectively, you must exer- cise at a low intensity level for a sustained period of time. During the first few minutes of exercise, your body uses carbohydrate calories for energy. Only after the first few minutes of exercise does your body begin to use stored fat calories for energy.
Page 27
PART LIST Model No. NTL60011.0 R0811A Key No. Qty. Description Key No. Qty. Description #8 x 1/2" Ground Screw Right Rear Foot 3/8" x 2 1/2" Bolt Left Rear Foot 3/8" Nut #8 x 1/2" Ground Screw 3/8" x 4" Screw #8 x 1/2"...
Page 29
EXPLODED DRAWING B Model No. NTL60011.0 R0811A t"" -_---21...
Page 30
EXPLODED DRAWING C Model No. NTL60011.0 R0811A...
Page 31
EXPLODED DRAWING D Model No. NTL60011.0 R0811A 97--...
Page 32
ORDERING REPLACEMENT PARTS To order replacement parts, please see the front cover of this manual. To help us assist you, be prepared to provide the following information when contacting us: • the model number and serial number of the product (see the front cover of this manual) •...