Canon FS20 Quick Manual page 80

Preparations
-
~
To allow the camcorder to be
operated with the wireless controller
from the front.
Subject can monitor the LCD screen
CD
NOTES
About the LCD screen: The screen is
produced using extremely high-precision
manufacturing techniques, with more than
99.99% of the pixels operating to
specification. Less than 0.01 % of the
pixels may occasionally misfire or appear
as black, red, blue or green dots. This has
no effect on the recorded image and does
not constitute a malfunction.
24
LCD Backlight
You can set the brightness of the
screen to dim, normal or bright. To set
the screen to dim, turn on [LCD
DIMMER]
(OJ
88). To toggle between
normal and bright or to turn off [LCD
DIMMER], perform the following
procedure.
While the camcorder is on hold
~--
'
[~I_~~J
pressed down for more than
2 seconds.
Repeat the operation to switch between
normal and bright.
C!2~~!~~
. _ . __. . _ ___. .
• This setting does not affect the
brightness of the recording.
• Using the bright setting will shorten the
effective usage time of the battery pack.
• When the compact power adapter is
connected while the brightness of the
screen is normal, the brightness will
automatically change to bright.