Canon FS20 Quick Manual page 33

Shooting Video and Taking Photos
3
Take a photo.
G)
Press halfway to activate the autofocus (AF).
®
Press fully to record
the photo.
~
@
Flashes while the photo is being recorded on the memory.
~
CD
A
AF frames
I /
f-i\
"~ ,~
0
• ACCESS
~
,
~
/ I "
o
IMPORTANT
• Observe the following precautions while the ACCESS indicator is on or
flashing. Failing to do so may result in permanent data loss or damage to
the memory.
- Do not open the memory card slot cover.
- Do not disconnect the power source or turn off the camcorder.
- Do not change the operating mode - do not press the
."!;[B
button and
do not change the position of the camera mode dial.
CD
NOTES
• About the Flexible Recording Modes: Use the flexible recording modes
to access the menus and advanced functions and to change various
settings up to your preferences. Set the camera mode dial to
~~
to record
movies or to
0
to record photos.
_,I See Shooting Video, 34; Advanced Functions, 44; Taking Photos,
60; Additional Functions, 66 for details.
33