Canon FS20 Quick Manual page 124

Photos
lEQ~~.~J
0
[On
PROTECT]
0
Desired option
0
[YES]
0
[OK]
r~
l~~
o
IMPORTANT
Initializing the recording media (CO 32) will
permanently erase all recordings,
including protected photos.
(iH)/mD/~
Copying Photos
You can copy photos only from the
built-in memory to the memory card.
[~I
(CO 25)
Copying Single Photos
1
Open in single photo view the
photo you want to copy
(CO
63).
2
Copy the photo to the memory
card.
[~q~~.J
0
[I{Q]
COpy]
0
Press
@
o
[YES]
0
Press
ifJ:lNC.]
twice
Copying Photos from the Index Screen
Options
[AltPHOTOSE '..
Copies all the photos.
[ONE PHOTO]
Copies only the photo marked with the orange
selection frame.
68
[S~~CT£D ?t1PTOSl .
"
...
/.-._,-'
,
Copies all the photos selected in advance
(marked with a ../ checkmark). Refer to
Pre-
selecting Recordings from the Index Screen
(CO 42).
1
Open the index screen of the
photos recorded in the built-in
memory.
Move the zoom lever toward Wand
then select the. (built-in memory)
tab.
2
If you want to copy only one
photo, select (A., -<III~) the photo
you want to copy.
3
Copy the photo(s).
l~~.~~J 0
[fiECOPY]
0
Desired option
€)
[YES]*
€)
[OK]**
0
l.r=~.~~:J
*
If you selected [SELECTED PHOTOS] or
[ALL PHOTOS], you can press
<§
to
interrupt the operation while it is in
progress.
**This step is not required when copying a
single photo.
O.I.~~.~~!~~!
_ _ .
Observe the following precautions while
the ACCESS indicator is on or flashing.
Failing to do so may result in permanent
data loss.
- Do not open the memory card slot cover.
- Do not disconnect the power source or
turn off the camcorder.
- Do not change the operating mode.
CD
NOTES
• If there is not enough space on the
memory card, the camcorder will copy
as many photos as possible before
stopping the operation.