Controllers (Ctrls) Page 7-10 - Kurzweil PC3LE Musician's Manual

Setup Mode
The Setup Editor
Controllers (CTRLS) Page
Press the CTRLS soft button to display the Controllers page. The Controllers page allows you to
assign any of the PC3LE's physical controllers (knobs, pads, switches, mod and pitch wheels,
foot switches and expression pedal) to control a program specific parameter or MIDI controller
number for the currently selected zone.
First, use the Chan/Zone buttons to the left of the display to select the desired zone that you
wish to assign a controller for. Next, on the Controllers page, use the cursor buttons to select the
Control field, hold the Enter button on the alphanumeric pad and then move any of the PC3LE's
physical controllers. This will select that controller and display its available parameters. (You
can also scroll through the list of controllers in the Control field by selecting the Control field
with the cursor buttons and using the Alpha Wheel or the ‐/+ buttons to scroll through the list.)
This is how each
shift row for accessing
different switches
or knobs corresponds
to the switch and knob
names in the Setup
Editor. Press the
Shift button to the left
of the switches or
knobs to access each
row. The LED to the
left of each row will
light to show which
row is being
accessed.
Once you have selected the desired controller in the Controls field, use the cursor buttons to set
the controller destination and other available parameters. See below for explanations of each
controller's parameters.
7-10
Shift
Switch 1
Switch 6
KB3
Shift
Knob 1
Knob 6
Knob 11
ASSIGNABLE SWITCHES
Switch 2 Switch 3
Switch 7 Switch 8
ASSIGNABLE CONTROLS
Knob 2 Knob 3
Knob 7 Knob 8
Knob 12 Knob 13
Switch 4 Switch 5
Switch 9 Switch 10
Knob 4 Knob 5
Knob 9 Knob 10
Knob 14 Knob 15