Cleaning And Sanitizing Instructions; [A] Cleaning Solution - Hoshizaki MODULAR FLAKER F-801MAH/-C Service Manual

[Water-Cooled Models]
1) Turn off the power supply and wait for 3 minutes.
2) Turn on the power supply and wait for 20 seconds.
3) Close the water supply line shut-off valve.
4) Open the drain valve and quickly blow the water supply line from the drain valve to drain
water in the condenser.
5) Follow the above steps 3) through 11) in [Air-Cooled and Remote Air-Cooled Models].

2. Cleaning and Sanitizing Instructions

1. HOSHIZAKI recommends cleaning this unit at least once a year. More
frequent cleaning, however, may be required in some existing water
conditions.
2. To prevent injury to individuals and damage to the icemaker, do not use
ammonia type cleaners.
3. Always wear liquid-proof gloves to prevent the cleaning and sanitizing
solutions from coming into contact with skin.

[a] Cleaning Solution

Dilute 4.8 fl. oz. (142 ml) of recommended cleaner Hoshizaki "Scale Away" or
"LIME-A-WAY" (Economics Laboratory, Inc.) with 0.8 gallons (3 l) of warm water. This is a
minimum amount. Make more solution if necessary.
For safety and maximum effectiveness, use the solution immediately after
dilution.
WARNING
IMPORTANT
52