Audio Adjustments; Audio Control; Adjusting The Detail Of Audio Control - Kenwood KDC-X592 Instruction Manual

Audio Adjustments
- - -
Middle Center Frequency "MIDDLE FRO"
0.5/1.0/1.5/2.0 kHz
Middle 0Factor "MIDDLE 0FACTOR" 1.00/2.00
10.0/12.5/15.0117.5 kHz
"BASS FRO"
Treble Center Frequency "TREBLE FRO"
Bass 0Factor
Bass Extend
Bass Center Frequency
Treble level
Middle level
1
Select the Basic Audio item
Select the desired item to be set in detail from
followings;
• Bass level
• Middle level
•Treble level
For how to select Basic Audio items, see <Audio
Control> (page 15).
2
Enter Detail adjustment mode of Audio
Control
Press the [AUD] knob for at least 1 second.
3
Select the Detail Audio item to adjust
Press the
[AUD)
knob.
4
Adjust the Detail Audio item
Turn the [AUD] knob.
S
Exit the Detail Audio Control mode
Press the [AUD] knob for at least 1 second.
e
Function
of
KDC-X592
Adjusting the detail of Audio Control
Among the Basic Audio items, you can adjust the
Bass level, Middle level, and Treble level in detail.
Bass level
Exit Audio Control mode (Volume control mode)
Rear volume "REAR VOLUME" 0- 35
-:"Su-:"b-wo-o":"' " fer-:"l e -ve"' : ""l - "SUB-W LEVEL' ---15--+-15----
System 0 "NATURAL'I Natural/User setting/Rocl<!
"USER"I"ROCK"I Pops/EasylTop 40/Jazz
"POPS"I"EASY" 1 (The indicator turns on
"TOP40"I"JAZZ"I according to the setting.)
- - - - -
Bass level· "BASS LEVEL' -8 - +8
- - - - - - - -
Middle level· "MIDDLE LEVEL' -8 - +8
- - - - - - - -
Treble level· "TREBLE LEVEL' -8 - +8
-:-:--:----::-:---::----
Balance "BALANCE" Left 15 - Right 15
Fader "FADER" Rear 15 - Front 15
*
You can adjust these items in detail. Refer to <Adjusting
the detail of Audio Control> (Page 15). (Function of KDC-
X592)
*
Source tone memory: Puts the set up value in the
memory per source. (Detail Audio item is included)
~
~
• "USER": The ranges selected lastly for Bass level, Middle
level, and Treble level are recalled automatically.
1
Select the source to adjust
For how to select source item, refer to <Power!
Source Select button> of <Basic Operation> (page
4).
2
Enter Audio Control mode
Press the [AUD] knob.
3
Select the Audio item to adjust
Press the [AUD] knob.
4
Adjust the Audio item
Turn the [AUD] knob.
S
Exit Audio Control mode
Press any button.
Press a button other than the
[AUD]
knob or
[~]
and [An] button.
You can adjust following Audio Control items;
Audio Control
• When you set the Bass Extend to ON, low frequency
response is extended by 20%.
• You can exit the Audio Control mode at anytime by
pressing any button except for [AUD] knob,
[~]
and
[AD] button.
English
I 15