B. Place The Console Back (#4) In The Correct Position On The Upright Assembly (#3). See Figure; C. Using A Philips Head Screwdriver Install Two Screws 8-32 X .38" (#13) To Hold The Console Back 4) In Place. Do Not Fully Tighten At This Time. See Figure - CYBEX LCX-425T Owner's Manual

7. Install the console back to the upright assembly.
A.
Locate the console back (#4) and twelve screws, 8-32 x .38" (#13).
B.
Place the console back (#4) in the correct position on the upright assembly (#3). See Figure 5.
#13
Figure 5
C. Using a Philips head screwdriver install two screws 8-32 x .38" (#13) to hold the console back
(#4) in place. Do not fully tighten at this time. See Figure 5.
D. Using a Philips head screwdriver secure the console back (#4) to the upright assembly (#3) using
ten screws 8-32 x .38" (#13). Fully tighten the two screws installed in step 7C. See Figure 6.
#4
Figure 6
Assembly
and Setup
2-6
Cybex 425T Treadmill Owner's Manual
#4
#13
#3
#13
#3