Cisco DPC3829 User Manual page 40

Chapter 2 Installing the D OC SIS Wireless Residential Gateway
7 Wait a few seconds for the device to de discovered. When discovered, an LED
labeled 2.4 GHz or 5 GHz should turn on. At this point, a MoCA node should be
active in the network.
If you have not already done so, connect an Ethernet compatible device (for
8
example, a set-top, computer, or PlayStation) to the Ethernet port on the
residential gateway. The ONLINE LED should turn on and the device should be
ready to use.
Follow the steps above to connect additional residential gateways to the
9
network; note that up 15 residential gateways can be added to a MoCA network.
10 From the user interface, you can monitor a limited number of parameters
associated with the MoCA network. You may login at any time to check for
status or for troubleshooting purposes.
22 OL-30545-01-01