Cleaning And Maintenance; Cleaning And Sanitizing Instructions - Hoshizaki DCM-270BAH-OS Instruction Manual

III. Cleaning and Maintenance
CHOKING HAZARD: Ensure all components, fasteners, and thumbscrews are
securely in place after any cleaning or maintenance is done to the unit. Make
sure that none have fallen into the storage bin.
A. Cleaning and Sanitizing Instructions
Hoshizaki recommends cleaning and sanitizing this unit at least twice a year. More
frequent cleaning and sanitizing, however, may be required in some existing water
conditions.
1. To prevent injury to individuals and damage to the icemaker, do not use
ammonia type cleaners.
2. Carefully follow any instructions provided with the bottles of cleaning and
sanitizing solution.
3. Always wear liquid-proof gloves and goggles to prevent the cleaning and
sanitizing solutions from coming into contact with skin or eyes.
4. After cleaning, do not use ice made from the cleaning and sanitizing
solutions. Be careful not to leave any solution on the parts or in the storage
bin.
Fig. 5
Front Panel
Top Panel
Connector
(push-button model only)
Power Switch
Spout A
Spout B
Spout B
(optical-sensor
model only)
Grille
Drain Pan
Power Cord
WARNING
WARNING
16
Bin Top
Agitator
Drip Ring
Storage Bin
Ice Chute
Extruding Head
Evaporator Assembly
Reservoir
Air Filter
Louver
Control Switch