Horizon Fitness TREADMILL WT751 User Manual page 9

A S S E M BLY ST E P 2
HARDWARE BAG 2 CONTENTS :
* Be sure to tighten bolts after all are lined up.
* NOTE: Be careful not to pinch any
wires while assembling the masts.
ASSEMBLED IN STEP 2-D
A
Open HARDWARE BAG 2.
B
With running deck in lowered
position, place CONSOLE
on upright masts. Slide the
brackets that are underneath the
console into the top holes of the
upright masts.
C Place LOCK WASHER (C) and
BOLT (B) into flat side of LEFT
upright MAST and lightly tighten.
D
Place ARC WASHER (D) and BOLT
(B) into curved side of LEFT
upright MAST and lightly tighten.
E
Gently lift RIGHT side of the
console to connect the CONSOLE
CABLE. Carefully tuck wires in
mast to avoid damage. NOTE: Do
not pinch console cable or grip
pulse wires.
F
Repeat steps C-D above to
assemble the right side upright
mast and console.
G
Tighten all bolts completely.
8