Horizon Fitness T74 User Manual page 8

PR E- AS S EM BLY
Disassemble box and remove the cardboard packaging that is not beneath the treadmill. Do not attempt to
lift the treadmill at this time. Remove plastic wrap from console masts.
NOTE:
During each assembly step, ensure that ALL nuts and bolts are in place and partially threaded in before
completely tightening any ONE bolt. NOTE: A light application of grease may aid in the installation of hardware.
Any grease, such as lithium bike grease is recommended.
A S SE MB LY S T E P 1
HARDWARE BAG 1 CONTENTS :
LEAD WIRE
CONSOLE MAST
FLAT WASHER
BOLT (A)
SPRING WASHER
MAIN FRAME

FLAT WASHER (B)
BOLT (A)
16 mm
65 mm
Qty: 4
Qty: 4
CONSOLE CABLE
A
Open HARDWARE BAG 1.
B
Pull LEAD WIRE through RIGHT CONSOLE
MAST to drag upward.
C
Place LEFT CONSOLE MAST into upright
position. Be sure to hold the console mast
firmly, as it will not stay in the upright
position on its own.
D
Use BOLTS (A), 2 SPRING WASHERS (B),
and 2 FLAT WASHERS (C) to attach console
mast to the MAIN FRAME.
E
Repeat on the right side.
SPRING WASHER (C)
16 mm
Qty: 4