Status; Device Info - D-Link AC1750 User Manual

Section 3 - Configuration
This page displays the current information for the DIR-868L. It will display the LAN, WAN (Internet), and Wireless information.
If your Internet connection is set up for a Dynamic IP address then a Release button and a Renew button will be displayed.
Use Release to disconnect from your ISP and use Renew to connect to your ISP.
If your Internet connection is set up for PPPoE, a Connect button and a Disconnect button will be displayed. Use Disconnect
to drop the PPPoE connection and use Connect to establish the PPPoE connection.
General: Displays the router's time and firmware version.
WAN: Displays the MAC address and the public IP settings.
LAN: Displays the MAC address and the private (local) IP settings for the
router.
Wireless LAN1: Displays the 2.4GHz wireless MAC address and your wireless settings
such as SSID and Channel.
Wireless LAN2: Displays the 5GHz wireless MAC address and your wireless settings
such as SSID and Channel.
LAN Computers: Displays computers and devices that are connected to the router via
Ethernet and that are receiving an IP address assigned by the router
(DHCP).
IGMP Multicast Displays IPv4 and IPv6 multicast group addresses.
Memberships:
D-Link DIR-868L User Manual

Status

Device Info

107