Tools; Admin - D-Link AC1750 User Manual

Section 3 - Configuration
This page will allow you to change the Administrator password and also enable Remote Management.
Admin Password:
Enter a new password for the Administrator Login Name. Enter again to verify
password. The administrator can make changes to the settings.
Gateway Name:
Enter a name for your router.
Enable Graphical
Enables a challenge-response test to require users to type letters or numbers
Authentication:
from a distorted image displayed on the screen to prevent online hackers and
unauthorized users from gaining access to your router's network settings.
Enable HTTPS
Check to enable HTTPS to connect to the router securely. This means to connect
Server: to the router, you must enter https://192.168.0.1 (for example) instead of
http://192.168.0.1.
Enable Remote
Remote management allows the DIR-868L to be configured from the Internet
Management:
by a web browser. A username/password is still required to access the Web
Management interface.
Remote Admin Port:
The port number used to access the DIR-868L is used in the URL. Example:
http://x.x.x.x:8080 whereas x.x.x.x is the Internet IP address of the DIR-868L
and 8080 is the port used for the Web Management interface.
If you have enabled HTTPS Server, you must enter https:// as part of the URL
to access the router remotely.
Remote Admin
This section will list any rules that are created. You may click the Edit icon to
Inbound Filter:
change the settings or enable/disable the rule, or click the Delete icon to
remove the rule. Details will display the current remote admin filter.
D-Link DIR-868L User Manual

Tools

Admin

97