Network Filters - D-Link AC1750 User Manual

Section 3 - Configuration
Use MAC (Media Access Control) Filters to allow or deny LAN (Local Area Network) computers by their MAC addresses from
accessing the network. You can either manually add a MAC address or select the MAC address from the list of clients that are
currently connected to the Broadband Router.
Configure MAC Select Turn MAC Filtering Off, Allow MAC addresses
listed below, or Deny MAC addresses listed below
Filtering:
from the drop-down menu.
MAC Address: Enter the MAC address you would like to filter.
To find the MAC address on a computer, please refer
to the Networking Basics section in this manual.
DHCP Client List: Select a DHCP client from the drop-down menu and
click << to copy that MAC Address.
Schedule: Select a pre-defined or user created schedule from
the drop-down menu, or click New Schedule to
create a new schedule. You set a specific time frame
for the MAC filter rule to be active.
D-Link DIR-868L User Manual

Network Filters

81