Taping Foot; Inserting The Tape - Pfaff hobbylock 4760 Instruction Manual

Taping foot
This special sewing foot is for sewing cr
tapes. On stretch materials (knitwear)
the seams are prevented from stretchirg
when a tape is sewn on.
Preparing the machine
Differential
feed setting: set at N
Needles: use 1 or 2 needles,
depending on tape
width
Stitch width:
3 to 5 mm (adjustable
for a tape width from
4 to 9 mm)
Stitch length:,, N"
Thread tension:,, N"
inserting the tape:
1. Set needle at highest position.
2. Disengage upper knife.
3. Raise sewing foot and place tape ir.
guides -1- from right.
4. Push tape to right stop with
slide —2—.
5. Adjust location of tape in relation tc
needle by turning adjusting screw -3
6. Place fabric in and carry out a sewing
test.
48