—
Sew the second half of the zipper parallel at
the same distance .
Stop shortly before the end of the seam
and leave the needle in the material . Raise
the sewing foot and open the zipper.
—
You can now sew to the end of the seam.
—
Shortly before the end of the seam, open
the zipper and finish sewing the seam.
—
Close the zipper and baste the overlap
evenly onto the other zipper half.
—
Afterwa rds stitch along the basted seam.
TIP:
To achieve accurate seams we recom
mend using the edge guide.
Trouser zippers
—
Iron the seam margin over, making sure
there is an overlap of about 15/32) 4 mm.
—
Baste the zipper under the overlapp ing
edge so that the teeth are still visible.
—
Engage the zipper foot on the right and set
the needle at the required position .
Stitch close along the edge of the zipper.
55