Table of Contents
Advertisement
Basic Operations
Turning the Display On or Off
Turning On the Display
Press the power button on the display's control panel, or the power
button on the remote control. The power indicator on the display
will turn from red to green.
Turning Off the Display
Press the power button on the display's control panel, or the power
button on the remote control. The power indicator on the display
will turn from green to red.
Notes:
• The display's power off mode does not cut off the power supply,
and still consumes a very small amount of power. To completely
cut off the power supply, disconnect the display from the power
outlet.
• The display follows the VESA approved DPM Power Management
function. The power management function is an energy saving
function that automatically reduces the power consumption of the
display when the keyboard or the mouse has not been used for a
fixed period.
Locking/Unlocking the Controls
The display's controls can be locked and unlocked to prevent unwanted or accidental
operations.
Control Panel Buttons
Press and hold the (Left) and (Right) buttons simultaneously for 5 seconds.Once locked,
the control panel buttons (except the power button) do not function unless unlocked.
OSD Menu Function
Press and hold the (Up) and (Down) buttons simultaneously for 5 seconds. Once locked,
the
button on the control panel does not function, and the OSD menu can not be
MENU
used unless unlocked.
Power On/Off Function
Press and hold the
button on the control panel does not function, and current power on/off status will be kept
unless unlocked.
Remote Control Functions
Press and hold the
not respond to any remote control operations unless unlocked.
Switching Input Signals
Press the
VGA
corresponding inputs directly. You can also use the
select an input signal.
Adjusting Audio Volume Level
• Press the (Up) button on the control panel, or the
increase the audio volume level.
• Press the (Down) button on the control panel, or the
to decrease the audio volume level.
and (Right) buttons for 5 seconds. Once locked, the power
MENU
and (Left) buttons for 5 seconds. Once locked, the display does
MENU
,
,
,
and
DVI
HDMI
YPbPr
buttons on the remote control to switch to the
AV
button on the control panel to
INPUT
VOL+
VOL-
Basic Operations
button on the remote control to
button on the remote control
19
Advertisement
Table of Contents
