Cisco Linksys WAG54GX2 User Manual page 63

Wireless-G ADSL Gateway with SRX200
Online Game
Selecting Online Game will display the Select a Game drop-down menu, which will list a few common pre-
configured games. Select the game from the list, and then select its priority.
MSN Messenger
Select its priority from the drop-down menu, and click Add.
YAHOO Messenger
Select its priority from the drop-down menu, and click Add.
Skype
Select its priority from the drop-down menu, and click Add.
Voice Device
Enter the name of your network device in the Enter a Name field, enter its MAC Address, select its priority
from the drop-down menu, and click Add.
Add a New Application
Enter a Name Enter any name to indicate the name of the entry.
Category Select from Port Range or MAC Address for the Gateway to use to set the bandwidth priority.
Port Range If you selected Port Range, then this category will be available. It allows you to enter the port
range(s) that the application will be using. For example, if you want to allocate bandwidth for
FTP, you can enter 21-21. If you need services for an application that uses from 1000 to 1250,
you enter 1000-1250 as your settings. Port numbers can range from 1 to 65535. Check your
application's documentation for details on the service ports used.
You can define up to three ranges for this bandwidth allocation. For each port range, designate
the protocol type(s): TCP, UDP, or Both.
MAC Address If you selected MAC Address, then this category will be available. Enter the 12 hexadecimal
digit MAC Address to represent the device you want to set as a bandwidth priority. This is a
unique identifier for your network device. When the Gateway identifies the device entered, the
Gateway will allocate the priority set for that entry. Check the device's documentation to obtain
the MAC Address.
Chapter 6: Configuring the Wireless-G ADSL Gateway with SRX200
The Applications and Gaming Tab
Figure 6-41: QoS - Online Game
Figure 6-42: QoS - MSN Messenger
Figure 6-43: QoS - Voice Device
Figure 6-44: QoS - Add a New Application (Port Range)
56