Figure 5-7: Setup Wizard's Connect The Network Cable To The Gateway Screen; Figure 5-8: Setup Wizard's Power On The Gateway Screen - Cisco Linksys WAG54GX2 User Manual

Wireless-G ADSL Gateway with SRX200
8. The Setup Wizard will ask you to connect the other end of the network cable to the Gateway.
Then you can also connect additional PCs to the Gateway.
After you have done so, click the Next button.
9. The Setup Wizard will ask you to power on the Gateway. After you have done so, click the Next button.
Chapter 5: Setting up the Wireless-G ADSL Gateway with SRX200
Using the Setup Wizard
Figure 5-7: Setup Wizard's Connect the Network Cable
to the Gateway Screen
Figure 5-8: Setup Wizard's Power on the
Gateway Screen
14