Cisco Linksys WAG54GX2 User Manual page 46

Wireless-G ADSL Gateway with SRX200
The Wireless Access Tab
Wireless Network Access
Wireless Network Access. Select Allow All you want all computers to have access to the wireless network. To
restrict access to the network, select Restrict Access, and then select Prevent to block access for the
designated computers or Permit only to permit access for the designated computers. Click the Update Filter
List button, and the Mac Address Filter List screen will appear.
Enter the MAC addresses of the computers you want to designate. To see a list of MAC addresses for wireless
computers or clients, click the Wireless Client MAC List button.
The Wireless Client List screen will list MAC addresses for your wireless devices. Click the Refresh button to get
Figure 6-21: Wireless Access
the most up-to-date information. To add a specific computer to the Mac Address Filter List, click the Enable MAC
Filter checkbox and then the Update Filter List button. Click the Close button to return to the MAC Address Filter
List screen.
On the MAC Address Filter List screen, click the Save Settings button to save this list, or click the Cancel
Changes button to remove your entries.
When finished making your changes on this tab, click the Save Settings button to save these changes, or click
the Cancel Changes button to undo your changes. Click Help for more information.
Figure 6-22: MAC Address Filter List
Figure 6-23: Wireless Client MAC List
Chapter 6: Configuring the Wireless-G ADSL Gateway with SRX200 39
The Wireless Tab