Horizon Fitness FS 40 Assembly And User's Manual page 6

A SS E MB LY ST EP 4
HARDWARE BAG  CONTENTS :
FLAT WASHER (B)
Qty: 2
SEAT WELDMENT SET
BOLT (G)
FLAT WASHER (B)
LEG EXTENSION/
CURL DOWN TUBE
A Open HARDWARE BAG .
B Attach LEG ExTENSION/CURL DOWN TUBE to SEAT ASSEMBLY using 1 BOLT (G), 2 FLAT
WASHERS (B) and 1 NYLON NUT (C).
NOTE: Position the LEG ExTENSION/CURL DOWN TUBE so the cable attachment is facing
the gym.
C Insert SEAT SET SAFETY PIN.
10
FS 40 rev 1.0.indd 10-11
NYLON NUT (C) BOLT (G)
Qty: 1 Qty: 1
CENTER SUPPORT FRAME
FLAT WASHER (B)
NYLON NUT (C)
CABLE ATTACHMENT
ASSEM BLY STEP 
HARDWARE BAG 4 CONTENTS :
FLAT WASHER (B)
Qty: 6
CENTER SUPPORT FRAME
SEAT BACK PAD
SEAT BOTTOM PAD
NYLON NUT (C)
BOLT (N)
FLAT WASHER (B)
SEAT WELDMENT
END COVER
LEG PAD
LEG EXTENSION/
CURL DOWN TUBE
A Open HARDWARE BAG 4.
B Attach SEAT BACK PAD to CENTER SUPPORT FRAME using 2 SCREWS (H), 2 FLAT
WASHERS (B).
C Attach SEAT BOTTOM PAD to SEAT WELDMENT using 2 BOLTS (D), 4 FLAT WASHERS (B)
and 2 NYLON NUTS (C).
D Install assembled seat into gym.
E Install LEG PADS to LEG ExTENSION/CURL DOWN TUBE as shown in diagram.
BOLT (N) SCREW (H)
Qty: 2 Qty: 2
FLAT WASHER (B)
SCREW (H)
11
8/20/07 11:37:05 AM