Midi; Midi Channel Selection; Control Change Filter - GEM GK 350 Owner's Manual

MIDI

The MIDI section consists of two functions, TX and RX, which allow you to set the
Transmission (TX) and Reception (RX) channels independently for the keyboard as
a whole. Both Reception and Transmission channels also feature a Control Change
filter (on/off).

Midi channel selection

You can set the MIDI Transmission and Reception channels to any value from 1 -16,
or OFF.
If you press the MIDI [TX] button, the display shows the factory-set MIDI Transmis-
sion channel.
If you press the MIDI [RX] button, the display shows the factory-set MIDI Reception
setting (in this case All channels).
Use the [YES/+] button of the numeric keypad to increase the Transmission or Re-
ception channel, or the [NO/–] button to decrease it.

Control Change filter

To set the Control Change filter for either the Transmission (TX) or Reception (RX)
channel, press the [TX] or [RX] button twice. The display shows the current setting
(Off).
To activate (On) or deactivate (Off) the filter, use the [YES/+]-[NO/–] buttons of the
numeric keypad.
Note: It is not possible to assign separate and inde-
pendent MIDI channels to the voices and accompani-
ment sections.
GK350 25