Close Front Or Side Door; Disk Corrupted; Disk Problem - Lexmark X925 User Manual

Check [src] orientation or guides
Try one or more of the following:
•
Move the paper guides in the tray to the correct positions for the paper size loaded.
•
Make sure the paper size setting matches the paper loaded in the tray:
1
From the printer control panel Paper menu, check the Paper Size setting.
2
Before sending the print job, specify the correct size setting:
–
For Windows users, specify the paper size from Print Properties.
–
For Macintosh users, specify the paper size from the Page Setup dialog.
Close [tray] door
Close the specified tray door.

Close front or side door

Close the front or side door of the printer.

Disk corrupted

The printer attempted a hard disk recovery on a corrupted hard disk, and the hard disk cannot be repaired. The hard
disk must be reformatted.
Touch Format disk to reformat the printer hard disk and clear the message.
Note: Formatting deletes all the files stored on the printer hard disk.
Disk near full. Securely clearing disk space.
Try one or more of the following:
•
Touch Continue to clear the message and continue printing.
•
Delete fonts, macros, and other data stored on the printer hard disk.
•
Install a hard disk with higher capacity.

Disk problem

The printer hard disk must be reformatted.
Touch Format disk to reformat the printer hard disk and clear the message.
Note: Formatting deletes all the files stored on the printer hard disk.
Error reading USB drive. Remove drive.
An unsupported USB device has been inserted. Remove the USB device, and then install a supported one.
Troubleshooting
256