Hp Trusted Platform Module Option - HP ProLiant BL490c User Manual

Install the mezzanine card. Press down on the connector to seat the board.
5.
Install the access panel (on page 13).
6.
Install the server blade
7.

HP Trusted Platform Module option

Use these instructions to install and enable a TPM on a supported server blade. This procedure includes three
sections:
Installing the Trusted Platform Module board (on page 37).
1.
Retaining the recovery key/password (on page 38).
2.
Enabling the Trusted Platform Module (on page 38).
3.
Enabling the TPM requires accessing the ROM-Based Setup Utility (RBSU)
Utility" on page 49). For more information about RBSU, see the HP website
(http://www.hp.com/support/smartstart/documentation).
TPM installation requires the use of drive encryption technology, such as the Microsoft® Windows®
BitLocker™ Drive Encryption feature. For more information on BitLocker™, see the Microsoft website
(http://www.microsoft.com).
CAUTION:
can cause hardware damage or halt data access.
When installing or replacing a TPM, observe the following guidelines:
•
Do not remove an installed TPM. Once installed, the TPM becomes a permanent part of the system
board.
•
When installing or replacing hardware, HP service providers cannot enable the TPM or the encryption
technology. For security reasons, only the customer can enable these features.
•
When returning a system board for service replacement, do not remove the TPM from the system board.
When requested, HP Service provides a TPM with the spare system board.
("Installing a server
Always observe the guidelines in this document. Failure to follow these guidelines
blade" on page 17).
("HP ROM-Based Setup
Hardware options installation 36